There are many processes in the whole production process of the complete set of aerated brick equipment. How long does the aerated brick equipment need steam curing in production and is it the best?
The steam curing of the billet is carried out in the autoclave. The suitability of this process and the best time to steam these are the key points that all brick factories need to consider. If not properly autoclaved, the air block will not achieve its original excellent effectiveness. Unused or with poor resistance and resistance, it can not be well insulated. Fire resistant gas products will be in the downwind of the mall. Now let's talk about how long the best autoclave time should be for the gas billet in the kettle, so as to help more merchants to steam out high-yield and high-quality gas blocks. It is necessary to say a few points about the aerated brick equipment: generally, the total time of autoclaving the gas block in the autoclave is about 10-12 hours. However, I will tell you how long it should be the most accurate and optimal time.
If it is the billet that has been cut without defect, it only needs to autoclave for six to eight hours. As for the air billet that has not been cut, it is best to steam it for more than 10 hours. Only in this way can they be fully autoclaved and reach their best efficiency. Otherwise, the billet efficiency obtained by the most time is not the best, but will be gradually screened by the market. In fact, many things should be like this. They all need to have a certain moderate length of time, and only when they are within this measurement range, can their own excellent characteristics be shown to the extreme.
Liaoning Qinzhen Environmental Protection Building Materials Co., Ltd., founded in 2012, is located in Ximafeng Town, Dengta City, Liaoning Province, adjacent to Liaoning Shenmei Hongyang Thermal Power Co., Ltd., and is now a member of China Autoclaved Aerated Concrete Association.
The total investment is 60 million yuan, covering an area of 46000 square meters, and the building area is more than 12000 square meters. The use of the current domestic better scientific and technological production line has completely separated the traditional industry of brick making from manual, semi-automatic, and realized full assembly line automation. At the same time, it is a large manufacturer of autoclaved aerated concrete products in northeast China, integrating scientific research, production and operation. The company has winter production capacity. It is a new green, environmental protection and wall material manufacturer with an annual capacity of 400000 cubic meters and a daily output of more than 1500 cubic meters. Through the efforts of the company's scientific research team, it has the production capacity to produce products that meet the requirements of 50 winter melt tests in severe cold regions, and has the ability to process multi size Autoclaved aerated concrete blocks Processing capacity (thickness: 60, 80, 90100150180185190200300, etc.).
