-
Concrete blocks in sand aerated concrete blocks Key points of construction of sand aerated concrete blocks: (1) The base course shall be cleaned and leveled at the foundation plane or floor where aerated concrete masonry walls need to be built, and the center line, side line, door and window openings of the wall shall be popped out. The purpose is to ensure the correct location of masonry. The number of bricks shall be calculated from top to bottom (including the height of horizontal mortar joint and inclined block masonry
Published on: November 22nd, 2021-10 Clicks: 87
-
Functional characteristics of sand aerated block 1. Light and high strength absolute dry unit weight is 500-700kg/m3, which is 1/4 of standard brick and 1/3 of clay brick. It can effectively reduce the dead weight of buildings, reduce the investment in foundation and structure, and is very suitable for frame structures in various industrial and civil buildings, as well as buildings in weak geology. 2. Thermal insulation performance is clay brick 7
Published on: September 17, 2021 Clicks: 106
-
Installation and maintenance of sand aerated block Installation and maintenance of the machine is an important regular work, which should be closely coordinated with operation and overhaul, and full-time personnel should be on duty for inspection. 1. Installation and commissioning: 1. The equipment should be installed on a horizontal concrete foundation and fixed with anchor bolts. 2. During installation, pay attention to the perpendicularity of the main body to the horizontal. 3. After installation
Published on: October 13, 2021-10 Clicks: 69
-
If the sand aerated block is installed horizontally, it is necessary to build an external structure (angle steel or steel structure) around the sand aerated block to ensure the integrity and supportability of the protective structure. At present, many building designs have higher and higher requirements for the beauty of the building shape, and the requirements for building the exterior facade of the shape are more and more prominent, so it requires the entire building of exterior doors and windows
Published on: July 28, 2021 Clicks: 153
-
Autoclaved sand aerating blocks are made of cement and lime as calcareous materials, quartz as siliceous materials, aluminum powder as air entraining agent, pre cured and cut, and then cured by high-temperature steam. High precision, light weight and high strength, durable and impermeable, excellent fireproof performance, nailable, sawable, planable, with certain seismic capacity, and convenient construction. It is an upgraded product of traditional autoclaved aerator. Autoclaved aerated mixing
Published on: September 20, 2019 Number of hits: 128
-
Light brick partition wall refers to a non load bearing wall for building partition formed by using light bricks or light blocks with special adhesives. Because of its light weight, high strength, water resistance and impermeability, sound insulation and fire prevention, thermal insulation, green environmental protection, and fast construction, it has been subject to the national wall reform policy for many years
Published on: June 25, 2019 Number of hits: 104
-
As a new type of building material, sand aerated block has the advantages of light weight, good thermal insulation performance, earthquake resistance, etc., and is vigorously promoted and used by the country. The aerated block is made of a variety of mixtures, and its raw materials are very rich, with good social and economic effects
Published on: June 25, 2019 Number of hits: 185
-
Since the reform and opening up, the domestic economy and people's life philosophy have undergone tremendous changes. The income level of the Chinese people has greatly improved, and their living conditions are also constantly improving. Now people live in western-style houses, in various elegant neighborhoods, and gradually begin to have environmentally friendly, economical, and fast living
Published on: June 25, 2019 Number of hits: 278
-
Autoclaved aerated concrete product itself is a new type of lightweight and porous building material, which has good sound insulation and heat insulation properties, as well as a new type of wall material without radiation and durability. The vertical mortar joints of the upper and lower blocks of the aerated concrete block wall should be staggered, and the staggered length should be 3
Published on: June 25, 2019 Number of hits: 230
-
Shenyang aerator manufacturer reminds you that in order to avoid cracks in the aerator, we should pay attention to the following aspects during the construction design: 1. When the wall length exceeds 5m, the wall should be set
Published on: June 25, 2019 Clicks: 126
-
Sand aerated block is a new type of environmental protection material, which is used more and more in building construction. The production of aerated block requires professional production equipment, but the noise of such equipment is generally high. I believe many people are very worried about this problem. Today, let's see how to
Published on: June 25, 2019 Number of hits: 116
-
Sand aerated block is a kind of environment-friendly building material now. We may not see many of them in ordinary times, but does it sound inconceivable to those who need additives in the manufacturing process of aerated block? Not only food, but also building materials. Don't worry
Published on: June 25, 2019 Number of hits: 104
-
Today, Shenyang aerated brick manufacturer will introduce you what is fly ash aerated brick. 1. Volume weight fly ash roof thermal insulation aerated concrete is a kind of building product with porous structure. Light volume weight is one of its main characteristics, and the weight can be controlled by air entraining agent. Fly ash roof insulation, aerated coagulation
Published on: June 25, 2019 Number of hits: 68
-
Gas dispensing blocks have been more and more used in the construction industry. Because they are environmentally friendly building profiles, and because they are light and environmentally friendly, some points that need attention in the use process may be ignored if you do not pay attention. Qin Zhen, the manufacturer of Shenyang gas dispensing blocks, reminds you that although they are
Published on: June 25, 2019 Clicks: 132
-
There are many processes in the whole production process of the complete set of aerated brick equipment. How long does the aerated brick equipment need steam curing in production and is it the best? The steam curing of the billet is carried out in the autoclave. The suitability of this process and the best time to steam these are the key points that all brick factories need to consider. If not properly autoclaved, the air block will not achieve its original excellent effectiveness
Published on: June 25, 2019 Number of hits: 387
-
In the construction of aerated bricks, it is impossible that there are no problems at all. So today's mini editor summarizes several common faults and solutions in the construction of aerated bricks. Let's take a look! As autoclaved aerated concrete blocks have not been widely used in China for a long time, the production capacity of various places is not concerned, and some projects are tight,
Published on: June 25, 2019 Number of hits: 111
-
Autoclaved aerated concrete product itself is a new type of lightweight and porous building material, which has good sound insulation and heat insulation properties, as well as a new type of wall material without radiation and durability. All indicators of Qin Zhen's environmental protection products are superior to the national standards, and can constantly meet the customized needs of customers
Published on: June 25, 2019 Number of hits: 165
-
Since the reform and opening up, the domestic economy and people's life philosophy have undergone tremendous changes. The income level of the Chinese people has greatly improved, and their living conditions are also constantly improving. Now people live in western-style houses, in various elegant neighborhoods, and gradually begin to have environmentally friendly, economical, and fast living
Published on: June 27, 2019 Clicks: 184
-
1、 Autoclaved aerated concrete blocks always have good functions in application, so people will choose to use them in many times to meet their requirements, and people will always meet their quality in application. When we need to select suitable bricks, we need not only consider bricks
Published on: June 25, 2019 Number of hits: 102
-
Congratulations on the official website of Liaoning Qinzhen Environmental Protection Building Materials Co., Ltd. and Kaihong Technology Cooperation officially launched in June 2019! Liaoning Qinzhen Environmental Protection Building Materials Co., Ltd., founded in 2012, is located in the Lighthouse of Liaoning Province
Published on: June 25, 2019 Number of hits: 276
-
Today, we will explain the difference between light brick and red brick. Is red brick better or light brick better? Red brick (solid clay brick) is made of clay, shale, coal gangue and other raw materials after crushing, mixing, kneading, manual or mechanical pressing, and then dried and placed in 900 shots
Published on: January 16, 2019 Number of hits: 145
-
There are two main types of application in the building system: the first type is the multi-storey mixed structure, which mainly gives play to the advantages of good thermal insulation performance of aerated concrete. Under the condition that the original horizontal bearing system of multi-storey buildings remains unchanged, it is the most economical thermal insulation method among similar systems to use it as an external wall material as well as thermal insulation material. The second type is the reinforced concrete frame structure system
Published on: January 16, 2019 Number of hits: 234
-
Aerated concrete block is a new type of building material with light weight, porous, heat insulation, good fire resistance, nailing, sawing, planing and certain seismic capacity. As early as the early 1930s, China began to produce this product, and it is widely used in Shanghai International Hotel, Shanghai Tower, Fuzhou
Published on: January 16, 2019 Number of hits: 252
-
Through the observation of the production process of lightweight concrete, the following problems mainly exist in the mixing of lightweight concrete: 1. The density of foam and cementitious material is 200~300kg/m ³ Left and right lightweight concrete, the total volume of foam can really account for 70%~8% of lightweight concrete
Published on: January 16, 2019 Number of hits: 164
-
Autoclaved aerated concrete blocks have good workability. Able to saw, plane, nail, mill and drill. And reinforcement can be added during manufacturing. It brings great convenience and flexibility to the construction. When the temperature of aerated concrete is below 600 ℃, its compressive strength increases slightly. When the temperature is about 600 ℃, its compressive strength is close to that of normal temperature
Published on: January 16, 2019 Number of hits: 270
-
In 2019, in order to meet the current requirements of building construction accuracy in Liaoshen area and improve product quality, the company invested 2 million yuan again for equipment technical transformation, ensuring that the products produced meet and exceed national standards, and established a more stringent enterprise to meet the market requirements for high-precision blocks
Published on: January 16, 2019 Number of hits: 334
