What should they pay attention to in the construction of new wall materials?
When building new walls, different materials are used, construction methods are different, and attention to details is also different.
1. Construction of light brick partition wall
The 100mm x 300mm x 600mm aerated brick is a common material for light brick partition walls. When stacking, attention should be paid to the connection between the new wall and the original load-bearing wall, which should be reinforced with steel bars vertically deep into the foundation layer. The corners of the wall should be bent with a whole bar to avoid cracks in the corners.
2. Construction of skeleton partition wall
The important thing of the skeleton partition is to set out, determine the wall position, and then set out to lead to the top surface and side wall to ensure the perpendicularity of the wall. If it is necessary to install some water and electricity pipes in the wall, it needs to be paved in advance to avoid secondary wall demolition.
3. Construction of partition gypsum board
The fixing of gypsum board should be paid attention to in the construction of gypsum board partition, because if the material problem is not properly fixed, the gypsum board will break. Self tapping screws shall be used for fixing gypsum board. When nailing, the spacing between nails shall be kept within 200mm, the spacing between nails in board shall be kept within 300mm, and the screw and board edge shall be kept within 10mm - 15mm.
Liaoning Qinzhen Environmental Protection Building Materials Co., Ltd., founded in 2012, is located in Ximafeng Town, Dengta City, Liaoning Province, adjacent to Liaoning Shenmei Hongyang Thermal Power Co., Ltd., and is now a member of China Autoclaved Aerated Concrete Association.
With a total investment of 60 million yuan, the company covers an area of 46000 square meters and a building area of more than 12000 square meters. It uses the current top domestic high-tech production line, making the traditional industry of brick making completely separate from manual and semi-automatic, and realizing full assembly line automation. At the same time, it is the largest manufacturer of autoclaved aerated concrete products in Northeast China, integrating scientific research, production and operation. The company has winter production capacity. It is a new green, environmental protection and wall material manufacturer with an annual capacity of 400000 cubic meters and a daily output of more than 1500 cubic meters. Through the efforts of the company's scientific research team, it has the production capacity to produce products that meet the requirements of 50 winter melt tests in severe cold regions, and has the ability to process multi size Autoclaved aerated concrete blocks Processing capacity (thickness: 60, 80, 90100150180185190200300, etc.).
