A brief introduction of Shenyang Gas Filling will show you more! Aerated concrete block It is usually used for walls and has good thermal insulation performance. The strength value of aerated concrete block is very important. Let's take a look at the strength value of aerated concrete block and concrete block.

Considering the production characteristics of aerated concrete blocks, in order to facilitate production inspection and accurate calibration of the strength of aerated concrete blocks, the test strength in the original test air drying state (water content 10%) is changed to the test strength in the kettle (water content) 35% - 40%). Select three aerated concrete blocks away from the side of the side formwork at random in the state of kettle, and cut three sides of 100mm in the middle of the gas production direction of each aerated concrete block. The cube test blocks form a group, and the average value of the cube compressive strength of 95% maintenance rate measured by the standard test method is taken as the standard value of the compressive strength grade of the aerated concrete block.

Aerated concrete block has good heat insulation performance, which can meet the energy saving requirements of single material in wall materials. Aerated concrete block equipment is not only responsible for the protection and filling of buildings, but also very good. It needs to bear the load of veneer, which puts forward high requirements for physical properties such as compressive strength. Among them, the strength grade of concrete (refers to the compressive strength of concrete) is an important indicator.

The content of this article comes from the Internet. If you have any questions, please contact us!