Aerator block Nowadays, it has been used more and more in the construction industry. Because it is an environmentally friendly building profile, and it is heavy and environmentally friendly, some things that need attention in the application process may be ignored if you do not pay attention, Shenyang gas filling block The manufacturer reminds you that although it is a small detail, if you do not pay attention, it will also have a certain impact on the whole. Let's have a look.

1. Stop reasonable adjustment of equipment molding, cloth distribution and vibration parameters. Once adjusted, do not change them at will, otherwise the quality of products will be affected;

2. When using wooden pallets, make sure that their appearance is flat, otherwise the height error of the bricks marked on the same wooden pallets is very large;

3. When steam curing, pay attention to the change of season, and stop adjusting the static stop time, cooling rate, steam temperature and other curing parameters in time to avoid appearance cracking;

4. The molding height of the aerated block must strictly conform to the rules and regulations, so as not to affect the strength of the building;

5. The setting of water cement ratio is very critical. It is necessary to repeat the experiment while making theoretical calculation;

6. Since the strength of fly ash concrete can only reach about 70% when it is steam cured at room temperature and low temperature, the later strength growth of fly ash concrete needs water, so the aerated block is placed behind the waste yard and watered once to ensure that it is fully watered.

These are the six points to pay attention to. We must ensure its flatness and the proportion of various ingredients, and stop the normal maintenance. Only pay attention to the details, can it not affect the whole.

The content of this article comes from the Internet. If you have any questions, please contact us!