Journalism
-
Gas dispensing blocks have been used more and more in the construction industry. Because they are a kind of environment-friendly building profile, they are bulky and environmentally friendly, so some things that need attention in the process of application may be ignored if you don't pay attention. Shenyang gas dispensing block manufacturer reminds you that although it is a small detail, if you don't pay attention, it will also have a certain impact on the whole, Come together
Published on: September 12, 2019 Number of hits: 176
-
Light bricks generally refer to foam bricks, which are used for normal indoor partitions, without adding floor load, and sound insulation effect is good. The strength products are made of high-quality tabular corundum and mullite as the aggregate, sillimanite composite as the matrix, special additives and a few rare earth oxides, which are mixed and formed under high pressure and fired at high temperature. Generally, the raw materials produced by light insulating refractory bricks are clay
Published on: November 21, 2019 Number of hits: 121
-
With the development of the construction industry in China, more and better building materials are needed to meet the needs of the development of construction projects
Published on: November 22, 2019 Number of hits: 219
-
The raw materials for producing Shenyang aerated blocks are mainly cement, lime, sand, fly ash, etc. The produced aerated brick is a cement concrete product, which contains calcium silicate hydrate gel generated by water maintenance. It has a large water cement ratio, a large amount of cementitious material, and the aggregate is air. Although it has been autoclaved, the reduction value can only be controlled at 0.04% (4/10000)~0.06% (10/10000) according to cost factors
Published on: November 28, 2019 Clicks: 139
-
Five processes for manufacturing Shenyang aerated block products: 1. The raw materials for storing and feeding aerated blocks are transported into the factory by truck, and the fly ash (or sand, stone powder) is gathered in the raw material yard, and transported into the hopper when used. Bagged cement or bulk cement shall be stored in cement silo. When in use, it is loaded into the hopper. Chemicals, aluminum powder, etc. are separately placed in the chemical warehouse and aluminum powder warehouse, and are separately shipped to
Published on: November 28, 2019 Number of hits: 209
-
Product advantages Light weight Shenyang aerated block is generally 500-700kg/m3, which is only 1/4-1/3 of clay brick and lime sand brick, and 1/5 of general concrete. It is a lighter type of concrete, and is suitable for infill walls built in high-rise buildings and load-bearing walls built in low floors. By using this material, the dead weight of the whole building can be greater than that of ordinary brick concrete structure
Published on: January 14, 2020 Clicks: 182
-
Gas dispensing blocks have been used more and more in the construction industry in the past. Because they are a kind of environment-friendly construction profile, and because of their clumsiness and environmental protection, there are some things that need attention in the application process, which may be ignored if you do not pay attention. Shenyang gas dispensing block manufacturer reminds you that it is a small detail, and if you do not pay attention, it will also have a certain impact on the overall, Come together
Published on: October 17, 2020 Clicks: 125
-
How to better store the raw materials of Shenyang gas filling block equipment? Today, the master of the gas filling block manufacturer will ask you for advice! 1. The raw materials of the aerating block equipment are transported by trucks to the warehouse in the plant, and the fly ash is transported to the raw material yard to be concentrated, and is loaded into the hopper when it is used; In terms of treatment, the fly ash is sent to the ball mill for grinding through the electromagnetic oscillation feeder, provided by Star
Published on: March 31, 2021 Clicks: 84
-
What is the inspection method of Shenyang gas filling block? 1. Dimension and appearance: use steel ruler, steel tape and other measuring tools to measure the Wanji aerator, and the * * * small scale is 1mm. The length, height and width of the scale shall be measured at the ends of the two corresponding points, and two scales shall be measured respectively. 2、
Published on: June 16, 2020 Number of hits: 251
-
According to the analysis of Shenyang aerated block, this is because the aerated concrete has light volume weight, good overall function and low inertia force during earthquake, so it has certain seismic ability. This will have great advantages for our earthquake prone country. Aerated concrete has good processing function. Able to saw, plane, nail, mill and drill. In addition, reinforcement can be added during fabrication. Give construction belt
Published on: January 12, 2022 Number of hits: 70
-
Autoclaved aerated concrete blocks shall not be built on the floor or in the air. For the root of the wall that is often affected by dry and wet replacement, such as the toilet, terrace, external balcony, and the contact part between the air conditioner support plate and the masonry on the external wall, C20 plain concrete wall pads with the same width as the wall thickness and a height of no less than 0.2m should be poured; For other walls, autoclaved lime sand bricks should be used at their roots
Published on: February 21, 2022 Clicks: 87
-
Nowadays, people pay more and more attention to building materials. Shenyang aerated blocks have become the main materials of modern buildings by virtue of their own advantages. Here are some main advantages of aerated blocks to help you understand why they are so popular in the market. 1、 It is light in weight; This feature has brought great convenience to the transportation during the construction process,
Published on: June 23, 2022 Clicks: 60
