Aerator block Nowadays, it has been used more and more in the construction industry. Because it is a kind of environmental protection construction profile, and because of its clumsiness and environmental protection, some places that need attention in the process of application may be ignored if you do not pay attention, Shenyang gas filling block The manufacturer reminds you that although it is a small detail, if you are not careful, it will also have a certain impact on the whole. Let's have a look.

1. Stop reasonable adjustment of equipment molding, cloth distribution and oscillation degree parameters. Once adjusted, do not change them at will, otherwise the quality of products will be affected;

2. When using wooden pallets, make sure that their surfaces are flat, otherwise the height error of the bricks marked on the same wooden pallets is very large;

3. During steam maintenance, pay attention to the change of season, and stop adjusting the maintenance parameters such as static stop time, cooling rate, steam temperature in time to prevent surface cracking;

4. The molding height of the aerated block must strictly comply with the specifications, so as not to affect the strength of the building;

5. The setting of water cement ratio is very critical, and it is necessary to repeat tests in theoretical calculation;

6. Since the strength of fly ash concrete can only reach about 70% when it is steam cured at room temperature and low temperature, the later strength growth of fly ash concrete needs water, so the aerated block is placed behind the waste yard and sprayed once to ensure that it is fully watered.

The above is the focus of the six points of attention. We must ensure its flatness and the share of various ingredients, and also stop the normal maintenance. Just pay attention to the details, so as not to affect the whole.

The content of this article comes from the Internet. If you have any questions, please contact us!