Aerator block Now it has been more and more used in the construction industry. Because it is an environmentally friendly building profile, and because it is light and environmentally friendly, some points that need attention in the use process may be ignored if you do not pay attention, Shenyang gas filling block Qin Zhen, the manufacturer, reminds you that although it is a small detail, it will have an impact on the whole if you don't pay attention to it. Let's take a look.

1. Reasonably adjust the parameters of equipment molding, cloth distribution and vibration degree. Once adjusted, do not change them at will, otherwise the quality of products will be affected;

2. When using wooden pallet, make sure its surface is flat, otherwise the height error of the bricks marked on the same wooden pallet is very large;

3. During steam curing, pay attention to the seasonal changes, and timely adjust the maintenance parameters such as static stop time, cooling rate, steam temperature, etc. to prevent surface cracking;

4. The molding height of the aerator must strictly comply with the specified standards, so as not to affect the strength of the building;

5. The setting of water cement ratio is very critical, and it can be determined only by repeated tests while theoretical calculation;

6. Since the strength of the fly ash concrete can only reach about 70% when it is steamed at room temperature and low temperature, the later strength growth of the fly ash concrete needs water, so the aerated block is placed behind the finished product yard and watered once to ensure that it is fully watered.

These are the six points to pay attention to. We must ensure its smoothness and the proportion of various ingredients, and also carry out normal maintenance. As long as we pay attention to the details, it will not affect the overall. If you want to know more information, please click.