Autoclaved aerated concrete blocks Interpretation of the reason for the uneven thickness of the material in the production line, the particle size required for grinding the material to production is Aerated concrete block An important part of the equipment. In this regard, ball mills play an important role. We found that in the production process, Material Science There are many reasons for this phenomenon due to the lack of grinding and uneven thickness. The concrete aerated brick manufacturer will explain it one by one.

1. The type of autoclaved aerated concrete block price block equipment also has a certain impact on grinding. The discharge speed of overflow ball mill is slow, and the simple phenomenon that raw mineral particles are excessively broken due to the untimely removal. The powder concentrator that forms a closed circuit with the concentrator is easily damaged when the power of the intermediate powder is low, thus reducing the power of the milling skill. And whether the operation is in place will also affect Material Science Grinding of. Usually, too much ore will lead to a lack of grinding, and too little ore will lead to excessive damage.  

2. When the amount of ore fed is too much, when grinding ore in the closed circuit, the amount of sand pouring is very large, the normal passing capacity is increased, and the phenomenon of "roughness" will appear. On the contrary, excessive kneading will occur. Pulp consistency also has an impact. If the slurry concentration is too high, the flow rate in the grinder will be abundant, and the grinding time will be very long, and will be excessively damaged. If the slurry is too thin, the flow rate will increase, the grinding time will be shortened, and roughness will appear. Generally, the concentration of coarse grinding is 75% - 85%, while that of fine grinding is 65% - 75%.  

Mixed Material Science It flows into the mold in liquid form, and then forms in the mold. Repeating this operation may result in large foreign particles remaining on the mold of aerated concrete block equipment. In the subsequent production process, these particles will attach to the surface of the blank, and may even further cut the cutting line during the cutting process, so that the error of cutting the blank becomes larger, and the steel wire may crack. Serious situation.

3. The grinding is restricted by the conditions of the ore itself, which is related to the size and softness of the ore itself. If the ore has large particle size and loose structure, it is relatively simple to grind. If the particle size of ore becomes smaller, the texture becomes hard, the structure is compact and relatively difficult to grind.

The content of this article comes from the network. If you have any questions, please contact me to delete it!