Autoclaved aerated concrete blocks Manufacturer's introduction Autoclave Aerated concrete block It is a kind of porous concrete product made of fly ash, lime, cement, gypsum, slag, etc. as the main raw materials, with appropriate amount of air entraining agent, conditioner, bubble stabilizer, through the process of batching, mixing, pouring, static stop, cutting and high-pressure steam curing.

Aerated concrete block is a lighter type of concrete, which is suitable for infill walls of high-rise buildings and load-bearing walls of low rise buildings. Using this information, the deadweight of the whole building can be reduced by more than 40% compared with that of ordinary brick concrete structure buildings. Since the building's deadweight is reduced and the earthquake damage is small, the earthquake resistance ability of the building is greatly improved.

The thermal insulation effect of thick clay brick wall is also much better than that of 24cm brick wall. This greatly reduces the thickness of the wall, correspondingly expands the effective use area of the building, saves the thickness of building materials, improves the construction efficiency, reduces the project cost, and reduces the self weight of the building.

The analysis shows that this is because the aerated concrete has light volume weight, good overall performance and small inertia force during earthquake, so it has certain seismic ability. This will be of great benefit to our earthquake prone country.

Aerated concrete has good processing performance. Able to saw, plane, nail, mill and drill. And reinforcement can be added during manufacturing. It brings convenience and sensitivity to construction.

From the air hole structure of aerated concrete, it can be seen that because the internal structure of aerated concrete is like bread, evenly scattered with a large number of sealed air holes, it has sound absorption performance that ordinary building materials do not have.

As far as the current situation is concerned, prefabricated aerated concrete assembly of large plates can save waste stacking sites; Save masonry labor; Construction operation is reduced; The site construction progress is accelerated and the construction efficiency is improved.

The content of this article comes from the Internet. If you have any questions, please contact us!