-
There are three main factors affecting the hardness of Shenyang aerated blocks: the proportion of raw materials, the importance of post curing, and the impact of construction methods. 1. The proportion of raw materials in the proportion of raw materials for aerated bricks and the factors affecting the hardness of aerated bricks are mainly reflected in the water cement ratio. Under normal conditions, the hardness of aerated bricks and water cement is inversely proportional. At the time of construction, the mixing operation is carried out after the share is determined. mix
Published on: October 19, 2022-19 Number of hits: 234
-
Shenyang gas filling block has been replaced by traditional red brick in many areas. At present, we can often find the figure of gas filling block on the construction site of the whole city. What are the factors affecting the construction quality? Next, let's introduce to you: 1. Cement cement concrete raw materials play an important role in ensuring the technical nature of concrete and cement saving. It must be based on the project, local climate
Published on: September 13, 2022 Clicks: 75
-
Nowadays, people pay more and more attention to building materials. Shenyang aerated blocks have become the main materials of modern buildings by virtue of their own advantages. Here are some main advantages of aerated blocks to help you understand why they are so popular in the market. 1、 It is light in weight; This feature has brought great convenience to the transportation during the construction process,
Published on: June 23, 2022 Clicks: 64
-
Autoclaved aerated concrete blocks shall not be built on the floor or in the air. For the root of the wall that is often affected by dry and wet replacement, such as the toilet, terrace, external balcony, and the contact part between the air conditioner support plate and the masonry on the external wall, C20 plain concrete wall pads with the same width as the wall thickness and a height of no less than 0.2m should be poured; For other walls, autoclaved lime sand bricks should be used at their roots
Published on: February 21, 2022 Clicks: 93
-
With the spread of production lines of Shenyang gas filling block equipment, we found more and more problems in the production of Shenyang gas filling block equipment. During the practice of residual impurities in production, we found the following: residual impurities on the mold The larger particles of impurities on the mold will be directly attached to the surface of the green body, It will cause harm to cut steel wire or hang it directly
Published on: August 25, 2021 Clicks: 97
-
How to stabilize the quality of aerator? Shenyang aerated block manufacturer explains to you: we all know that the higher the quality ratio of aerated concrete blocks, the higher the income, the higher the profit will be. Strictly follow the production requirements, ensure the yield of equipment and equipment, use advanced production equipment, and improve production! 1. First of all, we should understand that the production of aerated concrete blocks will appear
Published on: June 4, 2021 Clicks: 126
-
What factors should be taken into consideration when selecting the filling block? The application of Shenyang aerator blocks has been very common in the construction industry, playing a role that cannot be ignored. Since it is such an important product, how do we choose when we choose? What should be considered? This is what we need to know, so let's get to know it now. First, the product itself, in the market
Published on: December 23, 2019 Clicks: 138
-
In the construction of aerated bricks, it is impossible that there are no problems at all. So today's mini editor summarizes several common faults and solutions in the construction of aerated bricks. Let's take a look! As autoclaved aerated concrete blocks have not been widely used in China for a long time, the production capacity of various places is not concerned, and some projects are tight
Published on: September 26, 2019 Number of hits: 307
-
Gas dispensing blocks have been used more and more in the construction industry. Because they are a kind of environment-friendly building profile, they are bulky and environmentally friendly, so some things that need attention in the process of application may be ignored if you don't pay attention. Shenyang gas dispensing block manufacturer reminds you that although it is a small detail, if you don't pay attention, it will also have a certain impact on the whole, Come together
Published on: September 12, 2019 Clicks: 178
-
A brief introduction of Shenyang Gas Filling will show you more! Aerated concrete blocks are usually used for walls and have good thermal insulation performance. The strength value of aerated concrete block is very important. Let's take a look at the strength value of aerated concrete block and concrete block. Considering the characteristics of aerated concrete block production, in order to facilitate production inspection and accurate calibration of aerated concrete block strength,
Published on: September 3rd, 2019 Clicks: 122
-
1 Light weight: Shenyang aerated block manufacturer introduces that the absolute dry weight is 500-600kg/m3, 1/4 of ordinary concrete, 1/3 of clay brick, and 1/2 of hollow brick, which is similar to wood and can float in water. It can reduce the weight of the building itself and greatly reduce the overall cost of the building. 2 Fire prevention: 700 ℃ fire-resistant, Class A incombustible refractory
Published on: August 30, 2019 Clicks: 154
-
Shenyang aerated block manufacturer introduced that aerated concrete aerated block is a stone that can float on the water - some people call it pumice! The air hole in the middle makes this material very light - also called light brick and light wall; It also enables this kind of information to block sound - also known as sound insulation brick, sound insulation brick; Because there is a lot of air in the data, it is also called aerated brick and aerated block; At the same time, this information
Published on: July 26, 2019 Number of hits: 117
-
Shenyang aerated block manufacturer introduced that as early as the Roman period, people used porous stone for the walls and dome of temples, which has reduced the self weight of buildings. After the concrete came out as an artificial stone, scholars tried to mix bubbles into it to reduce its self weight. How to generate bubbles has become a hot topic. In 1889, the Czech Hoffman obtained
Published on: February 26, 2020 Clicks: 156
-
Light brick partition wall refers to a non load bearing wall for building partition formed by using light bricks or light blocks with special adhesives. Because of its light weight, high strength, water resistance and impermeability, sound insulation and fire prevention, thermal insulation, green environmental protection, and fast construction, it has been subject to the national wall reform policy for many years
Published on: June 25, 2019 Number of hits: 104
-
As a new type of building material, sand aerated block has the advantages of light weight, good thermal insulation performance, earthquake resistance, etc., and is vigorously promoted and used by the country. The aerated block is made of a variety of mixtures, and its raw materials are very rich, with good social and economic effects
Published on: June 25, 2019 Clicks: 184
-
Since the reform and opening up, the domestic economy and people's life philosophy have undergone tremendous changes. The income level of the Chinese people has greatly improved, and their living conditions are also constantly improving. Now people live in western-style houses, in various elegant neighborhoods, and gradually begin to have environmentally friendly, economical, and fast living
Published on: June 25, 2019 Number of hits: 278
-
Autoclaved aerated concrete product itself is a new type of lightweight and porous building material, which has good sound insulation and heat insulation properties, as well as a new type of wall material without radiation and durability. The vertical mortar joints of the upper and lower blocks of the aerated concrete block wall should be staggered, and the staggered length should be 3
Published on: June 25, 2019 Number of hits: 230
-
Shenyang aerator manufacturer reminds you that in order to avoid cracks in the aerator, we should pay attention to the following aspects during the construction design: 1. When the wall length exceeds 5m, the wall should be set
Published on: June 25, 2019 Clicks: 126
-
Sand aerated block is a new type of environmental protection material, which is used more and more in building construction. The production of aerated block requires professional production equipment, but the noise of such equipment is generally high. I believe many people are very worried about this problem. Today, let's see how to
Published on: June 25, 2019 Number of hits: 116
-
Sand aerated block is a kind of environment-friendly building material now. We may not see many of them in ordinary times, but does it sound inconceivable to those who need additives in the manufacturing process of aerated block? Not only food, but also building materials. Don't worry
Published on: June 25, 2019 Number of hits: 104
-
Today, Shenyang aerated brick manufacturer will introduce you what is fly ash aerated brick. 1. Volume weight fly ash roof thermal insulation aerated concrete is a kind of building product with porous structure. Light volume weight is one of its main characteristics, and the weight can be controlled by air entraining agent. Fly ash roof insulation, aerated coagulation
Published on: June 25, 2019 Number of hits: 68
-
Gas dispensing blocks have been more and more used in the construction industry. Because they are environmentally friendly building profiles, and because they are light and environmentally friendly, some points that need attention in the use process may be ignored if you do not pay attention. Qin Zhen, the manufacturer of Shenyang gas dispensing blocks, reminds you that although they are
Published on: June 25, 2019 Clicks: 132
-
There are many processes in the whole production process of the complete set of aerated brick equipment. How long does the aerated brick equipment need steam curing in production and is it the best? The steam curing of the billet is carried out in the autoclave. The suitability of this process and the best time to steam these are the key points that all brick factories need to consider. If not properly autoclaved, the air block will not achieve its original excellent effectiveness
Published on: June 25, 2019 Number of hits: 387
-
In the construction of aerated bricks, it is impossible that there are no problems at all. So today's mini editor summarizes several common faults and solutions in the construction of aerated bricks. Let's take a look! As autoclaved aerated concrete blocks have not been widely used in China for a long time, the production capacity of various places is not concerned, and some projects are tight,
Published on: June 25, 2019 Number of hits: 111
-
Autoclaved aerated concrete product itself is a new type of lightweight and porous building material, which has good sound insulation and heat insulation properties, as well as a new type of wall material without radiation and durability. All indicators of Qin Zhen's environmental protection products are superior to the national standards, and can constantly meet the customized needs of customers
Published on: June 25, 2019 Number of hits: 165
-
Since the reform and opening up, the domestic economy and people's life philosophy have undergone tremendous changes. The income level of the Chinese people has greatly improved, and their living conditions are also constantly improving. Now people live in western-style houses, in various elegant neighborhoods, and gradually begin to have environmentally friendly, economical, and fast living
Published on: June 27, 2019 Clicks: 184
-
1、 Autoclaved aerated concrete blocks always have good functions in application, so people will choose to use them in many times to meet their requirements, and people will always meet their quality in application. When we need to select suitable bricks, we need not only consider bricks
Published on: June 25, 2019 Number of hits: 102
-
Congratulations on the official website of Liaoning Qinzhen Environmental Protection Building Materials Co., Ltd. and Kaihong Technology Cooperation officially launched in June 2019! Liaoning Qinzhen Environmental Protection Building Materials Co., Ltd., founded in 2012, is located in the Lighthouse of Liaoning Province
Published on: June 25, 2019 Number of hits: 276
-
Today, we will explain the difference between light brick and red brick. Is red brick better or light brick better? Red brick (solid clay brick) is made of clay, shale, coal gangue and other raw materials after crushing, mixing, kneading, manual or mechanical pressing, and then dried and placed in 900 shots
Published on: January 16, 2019 Number of hits: 145
-
There are two main types of application in the building system: the first type is the multi-storey mixed structure, which mainly gives play to the advantages of good thermal insulation performance of aerated concrete. Under the condition that the original horizontal bearing system of multi-storey buildings remains unchanged, it is the most economical thermal insulation method among similar systems to use it as an external wall material as well as thermal insulation material. The second type is the reinforced concrete frame structure system
Published on: January 16, 2019 Number of hits: 234
-
Aerated concrete block is a new type of building material with light weight, porous, heat insulation, good fire resistance, nailing, sawing, planing and certain seismic capacity. As early as the early 1930s, China began to produce this product, and it is widely used in Shanghai International Hotel, Shanghai Tower, Fuzhou
Published on: January 16, 2019 Number of hits: 252
-
Through the observation of the production process of lightweight concrete, the following problems mainly exist in the mixing of lightweight concrete: 1. The density of foam and cementitious material is 200~300kg/m ³ Left and right lightweight concrete, the total volume of foam can really account for 70%~8% of lightweight concrete
Published on: January 16, 2019 Number of hits: 164
-
Autoclaved aerated concrete blocks have good workability. Able to saw, plane, nail, mill and drill. And reinforcement can be added during manufacturing. It brings great convenience and flexibility to the construction. When the temperature of aerated concrete is below 600 ℃, its compressive strength increases slightly. When the temperature is about 600 ℃, its compressive strength is close to that of normal temperature
Published on: January 16, 2019 Number of hits: 270
-
In 2019, in order to meet the current requirements of building construction accuracy in Liaoshen area and improve product quality, the company invested 2 million yuan again for equipment technical transformation, ensuring that the products produced meet and exceed national standards, and established a more stringent enterprise to meet the market requirements for high-precision blocks
Published on: January 16, 2019 Number of hits: 334
